Best practices: Difference between revisions
JesseCrooks (talk | contribs) |
JesseCrooks (talk | contribs) m →Print Arrival: Fixed broken link |
||
| Line 17: | Line 17: | ||
* Check for things like [[DTS]] discs or special instructions from the archive. | * Check for things like [[DTS]] discs or special instructions from the archive. | ||
* Leader not taped down, tangled leader? Check to make sure there’s no damage to the first few feet of film. | * Leader not taped down, tangled leader? Check to make sure there’s no damage to the first few feet of film. | ||
* Take special care when handling prints on [[cores]]. Always support the entire reel when moving them, loosely wound film on a core can be disastrous if not handled properly | * Take special care when handling prints on [[core|cores]]. Always support the entire reel when moving them, loosely wound film on a core can be disastrous if not handled properly | ||
===Before the show=== | ===Before the show=== | ||
* Make sure your film inspection surface is clean. | * Make sure your film inspection surface is clean. | ||