470
edits
Kelmar RTV-8900: Difference between revisions
no edit summary
JesseCrooks (talk | contribs) No edit summary |
JesseCrooks (talk | contribs) No edit summary |
||
| Line 46: | Line 46: | ||
===Spindle Detente=== | ===Spindle Detente=== | ||
When the spindle is inserted into the receiver, a detent pin locks it in position. If the spindle is too difficult to insert or remove from the spindle receiver, or if it slips out too easily, the pressure with which the detent holds the spindle in place can be adjusted. Remove the cover of the head and locate the detente, which is a screw head held in place by a lock nut on the top of the spindle receiver. Loosen the lock nut to free the detente, adjust it to the desired position, and retighten the lock nut. | When the spindle is inserted into the receiver, a detent pin locks it in position. If the spindle is too difficult to insert or remove from the spindle receiver, or if it slips out too easily, the pressure with which the detent holds the spindle in place can be adjusted. Remove the cover of the head and locate the detente, which is a screw head held in place by a lock nut on the top of the spindle receiver. Loosen the lock nut to free the detente, adjust it to the desired position, and retighten the lock nut. | ||
| Line 56: | Line 55: | ||
To align the belt, first make sure the pulley on the main shaft is backed up against the collar that holds the spindle detent, which is always in a fixed position on the shaft. Then adjust the drive pulley to align with the pulley on the main shaft. | To align the belt, first make sure the pulley on the main shaft is backed up against the collar that holds the spindle detent, which is always in a fixed position on the shaft. Then adjust the drive pulley to align with the pulley on the main shaft. | ||
<gallery widths=300px heights=300px mode=packed> | |||
File:Kelmar rewind drive belt.jpg|Belt running from drive pulley (left) to main pulley. | |||
File:Kelmar spindle detent.JPG|Collar holding the spindle detent pin in the drag head. Loosen the lock nut to adjust the pin. | |||
</gallery> | |||
==Maintenance== | ==Maintenance== | ||