Inspection: Difference between revisions

'''What we look for when inspecting a print:'''

*<u>Orientation</u>: (for 35mm prints) 35mm A wind (emulsion out (facing upward to the sky). B Wind (emulsion in towards the center of the reel). Keep an eye out for prints that come reverse wind, i.e NOT correct for projection. When heads out a correctly wound 35mm print (coming off the reel counterclockwise) will be soundtrack towards you, picture upside down and emulsion facing out. When threaded in the projector the emulsion side will be facing in towards the lamphouse, base side will be facing towards the screen. Some prints will arrive tails out, emulsion out, which is NOT CORRECT for projection. You’ll have to wind over/over or under/under to correct the wind.

*<u>Base or Emulsion side?</u>: Know the difference so you can identify where the damage is, how it will look on screen. Emulsion scratches tend to be more visible to the audience. The base side will look shinier, the emulsion side more matte and you can often see the raised edges within the frame where the emulsion is thickest. Use your flashlight, move the film back and forth and observe how the light reflects off the surface. Some prints will be easier than others to tell which side is which.