| Welcome to Sprocket School! This project is maintained by volunteer editors. Learn more about how this works. |
Simplex X-L: Difference between revisions
Jump to navigation
Jump to search
JesseCrooks (talk | contribs) m (→Threading: Typo - "pad show") |
JesseCrooks (talk | contribs) m (Typo - "show pad") |
||
| Line 12: | Line 12: | ||
* Using the soundhead flywheel, turn the mechanism by hand to rotate the intermittent sprocket (Item 9) to its "rest" position. In the "rest" position, the index mark (Item 10) will align with one of the painted white index lines on the intermittent shaft collar after the sprocket has completed a four-perforation step. | * Using the soundhead flywheel, turn the mechanism by hand to rotate the intermittent sprocket (Item 9) to its "rest" position. In the "rest" position, the index mark (Item 10) will align with one of the painted white index lines on the intermittent shaft collar after the sprocket has completed a four-perforation step. | ||
* Open the pad roller assemblies (Items 2 & 6). Open the film gate (Item 3) by pulling the gate opening pin (Item 12). Slide the film gate forward to the threading position (as shown). Open the intermittent sprocket | * Open the pad roller assemblies (Items 2 & 6). Open the film gate (Item 3) by pulling the gate opening pin (Item 12). Slide the film gate forward to the threading position (as shown). Open the intermittent sprocket shoe pad (Item 5). | ||
* At this time, it is advisable to dismount the film gate pressure pad by sliding the gate to its full forward position and removing the (2) button head screws (Item 4). Use a clean, dry cloth to wipe down all film-bearing surfaces of the gate and trap (Item 14). Replace the pressure pad, slotted end down, after cleaning. This procedure should be performed at least once every day. | * At this time, it is advisable to dismount the film gate pressure pad by sliding the gate to its full forward position and removing the (2) button head screws (Item 4). Use a clean, dry cloth to wipe down all film-bearing surfaces of the gate and trap (Item 14). Replace the pressure pad, slotted end down, after cleaning. This procedure should be performed at least once every day. | ||