Talk:Simplex X-L: Difference between revisions

Talk:Simplex X-L (view source)

Revision as of 10:52, 8 May 2020

270 bytes added , 8 May 2020

no edit summary

JesseCrooks

467

edits

Revision as of 17:51, 7 May 2020 (view source) JesseCrooks (talk \| contribs) No edit summary ← Older edit		Revision as of 10:52, 8 May 2020 (view source) JesseCrooks (talk \| contribs) No edit summary Newer edit →
Line 6:		Line 6:

	I'm a bit confused by the notes about removing the gate. The XLs and PR-1014s I've run didn't have the gate opening pin (#12) listed here, and the gate was connected to the intermittent pad shoe, which seems to be separate in these instructions. For the ones I'm familiar with, you turn the lever that opens the gate, remove the knurled nuts that hold the gate onto a pair of shafts, and slide the gate and connected pad shoe towards you to remove it. --[[User:JesseCrooks\|JesseCrooks]] ([[User talk:JesseCrooks\|talk]]) 17:51, 7 May 2020 (PDT)		I'm a bit confused by the notes about removing the gate. The XLs and PR-1014s I've run didn't have the gate opening pin (#12) listed here, and the gate was connected to the intermittent pad shoe, which seems to be separate in these instructions. For the ones I'm familiar with, you turn the lever that opens the gate, remove the knurled nuts that hold the gate onto a pair of shafts, and slide the gate and connected pad shoe towards you to remove it. --[[User:JesseCrooks\|JesseCrooks]] ([[User talk:JesseCrooks\|talk]]) 17:51, 7 May 2020 (PDT)

			Figured it out. The threading diagram and instructions are for the Simplex Millennium, not the XL. The Millennium has the gate pin and separate pad shoe, while the XL does not. --[[User:JesseCrooks\|JesseCrooks]] ([[User talk:JesseCrooks\|talk]]) 10:52, 8 May 2020 (PDT)