1,306
edits
Xenon short-arc lamp: Difference between revisions
→General recommendations
(→Damage) |
|||
| Line 16: | Line 16: | ||
*Never run the lamp without ventilation, and run the blower for at least a 10min cooldown period after the lamp has been powered down. | *Never run the lamp without ventilation, and run the blower for at least a 10min cooldown period after the lamp has been powered down. | ||
*Always strike a lamp with the hand dowser closed. | *Always strike a lamp with the hand dowser closed. | ||
*Xenon lamps are highly pressurized and can explode. Full safety gear and proper training is required to replace or handle xenon lamps in any way | *Xenon lamps are highly pressurized and can explode. Full safety gear and proper training is required to replace or handle xenon lamps in any way. | ||
*Lamp alignment takes place within the closed lamphouse and is safe to do without safety gear. Lamp alignment is one of the top neglected things in a projection booth and must be done whenever a lamp is replaced. | *Lamp alignment takes place within the closed lamphouse and is safe to do without safety gear. Lamp alignment is one of the top neglected things in a projection booth and must be done whenever a lamp is replaced. | ||