File:3D test loop.JPG: Difference between revisions

Latest revision as of 23:18, 6 February 2019

3D alignment test loop for over/under 3D.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	23:17, 6 February 2019		2,226 × 2,226 (832 KB)	JesseCrooks (talk \| contribs)	3D alignment test loop.

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPhone 6s
Exposure time	1/30 sec (0.033333333333333)
F Number	f/2.2
ISO speed rating	160
Date and time of data generation	08:46, 1 November 2017
Lens focal length	4.15 mm
Latitude	40° 18′ 48.04″ N
Longitude	75° 7′ 49.34″ W
Altitude	127.752 meters above sea level
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	Instagram
File change date and time	08:46, 1 November 2017
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.21
Date and time of digitizing	08:46, 1 November 2017
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	4.9069920844327
APEX aperture	2.2750072066878
APEX brightness	2.497357992074
APEX exposure bias	0
Metering mode	Pattern
Flash	Flash did not fire, compulsory flash suppression
DateTimeOriginal subseconds	804
DateTimeDigitized subseconds	804
Supported Flashpix version	1
Color space	sRGB
Sensing method	One-chip color area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	29 mm
Scene capture type	Standard
GPS time (atomic clock)	07:37:29.89
Measurement precision	Poor (65)
GPS date	2 November 2017

Revision as of 23:17, 6 February 2019 (view source) JesseCrooks (talk \| contribs) (3D alignment test loop.)		Latest revision as of 23:18, 6 February 2019 (view source) JesseCrooks (talk \| contribs) No edit summary
Line 1:		Line 1:
	3D alignment test loop.		3D alignment test loop for over/under 3D.