Masking: Difference between revisions

(3 intermediate revisions by the same user not shown)

Line 3:

==Purpose==

Masking serves several purposes in exhibition settings. When projecting film, the [[aperture plates|aperture plate]] casts a blurry shadow because it is not on the same focal plane as the film, and masking is used to crop off this shadow and giving the illusion of a sharp edge. It also hides structural elements of the screen and mechanical elements of the masking system itself. Masking also absorbs lights around the visible image area projected on screen, making the image stand out and appear brighter.''"Where the black border is used there is not only less distraction for the eye, but the effect of added light brilliancy is had without its actuality."''<ref>F.H Richardson ''Motion Picture Handbook: a guide for managers and operators of motion picture theatres'', 3rd ed.(New York: Chalmers Publishing Company,1916)178.</ref>

''Where the black border is used there is not only less distraction for the eye, but the effect of added light brilliancy is had without its actuality.''

— F. H. Richardson

<ref>F.H Richardson. ''Motion Picture Handbook: a guide for managers and operators of motion picture theatres'', 3rd ed. (New York: Chalmers Publishing Company,1916), 178.</ref>

</blockquote>

Masking serves several purposes in exhibition settings. When projecting film, the [[aperture plates|aperture plate]] casts a blurry shadow because it is not on the same focal plane as the film, and masking is used to crop off this shadow and giving the illusion of a sharp edge. It also hides structural elements of the screen and mechanical elements of the masking system itself. Masking also absorbs lights around the visible image area projected on screen, making the image stand out and appear brighter.

==History==

Line 19:

Line 26:

===Fixed Width Screens===

Although ~~it is more rare~~ some theaters have fixed-width screens in which ~~case~~ the ~~visible screen size with the masking all the way open would be 1.85:1~~ and ~~the top and bottom masking would close down~~ for wider aspect ratios ~~like 2.39:1 or 2.2:1~~. This is common in theaters built before the widescreen era that retained their original screen footprint (rather than installing a wider ~~screener~~ in front of the original ~~front~~ of ~~house)~~.

Although less common than fixed height screens, some theaters have fixed-width screens on which the picture area becomes taller for narrower aspect ratios and shortens for wider aspect ratios. This is common in theaters built before the widescreen era that retained their original screen footprint (rather than installing a wider screen in front of the original proscenium, for example). It is also common in theaters in which the width of the auditorium is the limiting factor, such as single screens that have been twinned.

===Current Practice===

@@ Line 3: / Line 3: @@
 ==Purpose==
-Masking serves several purposes in exhibition settings. When projecting film, the [[aperture plates|aperture plate]] casts a blurry shadow because it is not on the same focal plane as the film, and masking is used to crop off this shadow and giving the illusion of a sharp edge. It also hides structural elements of the screen and mechanical elements of the masking system itself. Masking also absorbs lights around the visible image area projected on screen, making the image stand out and appear brighter.''"Where the black border is used there is not only less distraction for the eye, but the effect of added light brilliancy is had without its actuality."''<ref>F.H Richardson ''Motion Picture Handbook: a guide for managers and operators of motion picture theatres'', 3rd ed.(New York: Chalmers Publishing Company,1916)178.</ref>
+<blockquote>
+''Where the black border is used there is not only less distraction for the eye, but the effect of added light brilliancy is had without its actuality.''
+— F. H. Richardson
+<ref>F.H Richardson. ''Motion Picture Handbook: a guide for managers and operators of motion picture theatres'', 3rd ed. (New York: Chalmers Publishing Company,1916), 178.</ref>
+</blockquote>
+Masking serves several purposes in exhibition settings. When projecting film, the [[aperture plates|aperture plate]] casts a blurry shadow because it is not on the same focal plane as the film, and masking is used to crop off this shadow and giving the illusion of a sharp edge. It also hides structural elements of the screen and mechanical elements of the masking system itself. Masking also absorbs lights around the visible image area projected on screen, making the image stand out and appear brighter.
 ==History==
@@ Line 19: / Line 26: @@
 ===Fixed Width Screens===
-Although it is more rare some theaters have fixed-width screens in which case the visible screen size with the masking all the way open would be 1.85:1 and the top and bottom masking would close down for wider aspect ratios like 2.39:1 or 2.2:1. This is common in theaters built before the widescreen era that retained their original screen footprint (rather than installing a wider screener in front of the original front of house).
+Although less common than fixed height screens, some theaters have fixed-width screens on which the picture area becomes taller for narrower aspect ratios and shortens for wider aspect ratios. This is common in theaters built before the widescreen era that retained their original screen footprint (rather than installing a wider screen in front of the original proscenium, for example). It is also common in theaters in which the width of the auditorium is the limiting factor, such as single screens that have been twinned.
 ===Current Practice===