Welcome to Sprocket School! This project is maintained by volunteer editors. Learn more about how this works.

Optical soundtrack: Difference between revisions

From Sprocket School
Jump to navigation Jump to search
(Created page with "*optical sound formats *white light vs. red light *types of optical readers *issues related to optical sound '''How an Optical Sound Reader Works (the basics)'''")
 
No edit summary
Line 5: Line 5:




'''How an Optical Sound Reader Works (the basics)'''
'''How an Optical Sound Reader Works (the very basics)'''
- As the film runs through the sound head of the projector, light rays from the exciter lamp focus on the optical track through a slit lens. The optical track creates a variance in light, which is absorbed by a solar cell in the sound head and converted to variance in electrical impulses. These impulses are then amplified, sent to the sound processor, then to the speakers where they are converted to sound waves.
 
===Sound Issues===
*''Motorboating'': a term use to describe the sound heard when sprocket holes are passing in front of the exciter lamp. This can be caused because of a threading error, or because the film is shrunken.
*''Dirt build'' Always make sure your sound rollers and optics in the sound reader are clean. Never get liquid on the sound reader. Optics can be gently cleaned with a Q-Tip dipped in electronics grade alcohol. Sound drum should be clean and turn freely.

Revision as of 18:08, 30 March 2017

  • optical sound formats
  • white light vs. red light
  • types of optical readers
  • issues related to optical sound


How an Optical Sound Reader Works (the very basics) - As the film runs through the sound head of the projector, light rays from the exciter lamp focus on the optical track through a slit lens. The optical track creates a variance in light, which is absorbed by a solar cell in the sound head and converted to variance in electrical impulses. These impulses are then amplified, sent to the sound processor, then to the speakers where they are converted to sound waves.

Sound Issues

  • Motorboating: a term use to describe the sound heard when sprocket holes are passing in front of the exciter lamp. This can be caused because of a threading error, or because the film is shrunken.
  • Dirt build Always make sure your sound rollers and optics in the sound reader are clean. Never get liquid on the sound reader. Optics can be gently cleaned with a Q-Tip dipped in electronics grade alcohol. Sound drum should be clean and turn freely.