Welcome to Sprocket School! This project is maintained by volunteer editors. Learn more about how this works.

Split reel: Difference between revisions

From Sprocket School
Jump to navigation Jump to search
mNo edit summary
No edit summary
Line 4: Line 4:


==Use with projectors and automatic rewinds==
==Use with projectors and automatic rewinds==
Split reels are not recommended for projection. The two halves of a split reel are only held together by the threaded spindle in the center of the reel, and they can loosen and separate if used on a projector. They can also loosen and separate on a rewind table if rewinding is not done at a reasonable speed.  
The two halves of a split reel are held together by the threaded spindle in the center of the reel. When properly tightened, the two halves of the internal flange should be flush to each other and fully tightened. Care must be taken to ensure that the two halves of the reel are secure throughout use, and that the reel itself is in good repair. Because a seemingly-tight split reel can separate while in motion (potentially causing [[film damage]]), it is important not to leave them unattended on automatic rewinds, or use split reels for projection.
 
Loosening can be avoided by considering how the wind orientation relates to the hub threading. If the reel is being rotated in the direction that would tighten the threading, you won't have to worry about the flange separating during rewind/playback.
 
Because of the risk of loosening, and because [[show reel|show reels]] are widely available, split reels are not recommended for projection.


==Issues with the pin==
==Issues with the pin==
[[File:Split-reel-nub.jpg|right|thumb|200px|Close-up of the center of a split reel, showing the pin.]]
[[File:Split-reel-nub.jpg|right|thumb|200px|Close-up of the center of a split reel, showing the pin.]]
Split reels usually have a metal pin next to the hub that helps to hold the core in place. Sometimes you will run across a core and a split reel that will not fit together. You may need to try another split reel or get creative to fix this situation (whether by hand-winding film onto a new core, carefully filing down the pin, or something we haven't thought of).
Split reels usually have a metal pin next to the hub that helps to hold the core in place. Sometimes you will run across a core and a split reel that will not fit together. You may need to try another split reel or get creative to fix this situation (whether by hand-winding film onto a new core, using a [[trailer flange]] to transfer instead, carefully filing down the core or the pin, or something we haven't thought of).


==Availability==
==Availability==

Revision as of 10:17, 22 April 2020

A 35mm split reel. This photo shows the two halves of the split reel, with a core holding a small amount of 35mm film on the half on the left.

A split reel is used when handling film stored on a core. In exhibition settings, they are used to transfer film from storage on cores to show reels for projection. They exist for all film gauges.

Use with projectors and automatic rewinds

The two halves of a split reel are held together by the threaded spindle in the center of the reel. When properly tightened, the two halves of the internal flange should be flush to each other and fully tightened. Care must be taken to ensure that the two halves of the reel are secure throughout use, and that the reel itself is in good repair. Because a seemingly-tight split reel can separate while in motion (potentially causing film damage), it is important not to leave them unattended on automatic rewinds, or use split reels for projection.

Loosening can be avoided by considering how the wind orientation relates to the hub threading. If the reel is being rotated in the direction that would tighten the threading, you won't have to worry about the flange separating during rewind/playback.

Because of the risk of loosening, and because show reels are widely available, split reels are not recommended for projection.

Issues with the pin

Close-up of the center of a split reel, showing the pin.

Split reels usually have a metal pin next to the hub that helps to hold the core in place. Sometimes you will run across a core and a split reel that will not fit together. You may need to try another split reel or get creative to fix this situation (whether by hand-winding film onto a new core, using a trailer flange to transfer instead, carefully filing down the core or the pin, or something we haven't thought of).

Availability

Split reels can be purchased from Goldberg Brothers through an authorized distributor like your cinema service company or technician, or one of the below cinema supply companies. 70mm split reels must be purchased through a service company or directly from Goldberg.

See also